CPANPLUS::YACSmoke

0.44 Sat Sep 5 11:40:10 BST 2009

• Bump to a stable release

0.43_07 Tue Aug 25 18:14:33 BST 2009

• Added Capture::Tiny to the testsuite so we can suppress output during testing

0.43_06 Mon Aug 24 19:53:50 BST 2009

• Cosmetic change to the PASS test results appending

0.43_05 Mon Aug 24 18:44:06 BST 2009

• Add PASS test results to the test report as per RT #40247
• Make sure we only get the very last test results
• Remove the NA test report code as CPANPLUS does this and we require a high enough version of that.

0.43_03 Fri Aug 21 11:11:11 BST 2009

• Two more testcases for NA detail and excluded dists

0.43_02 Fri Jul 24 15:41:57 BST 2009

• Fix setting no_update indexes if there isn't an index already
• Remove 'Extracted' messages from test reports

0.43_01 Mon Jul 20 13:36:49 BST 2009

• Expanded the testsuite to actually test things >:)

0.42 Fri Jun 26 22:50:23 BST 2009

• Fix path to the config file in Dist::YACSmoke, (Vincent Pit)

0.40 Fri Jun 12 00:15:26 BST 2009

• Added gmail.com to list of addresses we don't set MAILDOMAIN to, reported by Justin Hunter (arcanez)

0.38 Tue Jun 9 15:21:04 BST 2009

• Forgot to make the various modules actually use get_conf('base') to find the configuration files now

0.36 Tue Jun 9 14:54:10 BST 2009

• Added yactool a simple cli to CPANPLUS::YACSmoke
• CPANPLUS::Config::YACSmoke, set an env var to specify the base_dir for configuration files.
• Added no_update to config settings so the source files don't get updated during smoke runs.

0.34 Sun Apr 26 21:43:07 BST 2009

• CPANPLUS 0.86 is out, so we can set that as a prereq and make a stable release. Hurrah.

0.33_04 Fri Apr 17 14:05:59 BST 2009

• Remove the $ENV{PERL5_CPANPLUS_VERBOSE} from YACSmoke, causes problems with CPANPLUS testsuite and is unnecessary.

0.33_03 Tue Apr 7 21:00:19 BST 2009

• Make auto_set_repository() only run at author-time

0.33_02 Wed Apr 1 22:43:13 BST 2009

• Rolled back in the prereqs resolution which was required.

0.33_01 Mon Mar 30 11:54:18 BST 2009

• A few minor alterations to the format of the Changes.git file
• Rolled back 'prepare' stuff and saving of .yml state, this will be dealt with by save_state in recent dev CPANPLUS
• Included Module::Install::Repository functionality

0.32 Wed Mar 18 00:00:31 GMT 2009

• Updated required versions of Module::Build and CPANPLUS::Dist::Build
• Fixed crufty 'require Module::Build' check in Makefile.PL to use can_use() from Module::Install instead
• Added in 'configure_requires' support, stolen from CP::D::MM and CP::D::Build.

0.30 Tue Jan 6 16:05:15 GMT 2009

• Added detection of PERL5_MINISMOKEBOX env var

0.28 Fri Jan 2 13:53:45 GMT 2009

• Development release was fine, bumping to stable release.

0.27_01 Mon Dec 15 16:10:41 GMT 2008

• Implemented 'build_dir_reuse' type functionality into Dist::YACSmoke. It will 'trust' the build dir if it has seen a successful prepare/create and stash some meta data in the build dir in a .yacsmoke.yml file.

0.26 Tue Dec 9 06:10:09 GMT 2008

• Logic in install_prereq callback slightly out. If the prereq is marked as 'aborted' we really should not give up out of hand, but try it again until we get a FAIL or NA. Otherwise aborted prereqs will never get retried. etc.

0.24 Wed Nov 5 09:32:09 GMT 2008

• we now set conf_cpantest to 'dont_cc' so we don't CC the author or do those checks with http://testers.cpan.org/
• Added detection of PERL5_MINIYACSMOKER env var

0.22 Tue Oct 14 21:54:19 BST 2008

• Added setting MAILDOMAIN env var if it isn't already defined. This should make sending test reports that little bit faster.

0.20 Thu Oct 9 21:01:24 BST 2008

• Fixed the exported functions, reported by SHLOMIF
• Changed the M::B requirement to 0.30

0.18 Mon Oct 6 22:46:55 BST 2008

• Hopefully fixed the undefined %ENV value warnings.

0.16 Mon Sep 29 17:02:21 BST 2008

• Updated the RECENT file filtering to use Dave Golden's shiny improved regex for file extensions.

0.14 Sun Sep 28 19:49:06 BST 2008

• Dist::YACSmoke filter for cases where we didn't install a prereq for whatever reason. Guarantee that the report gets discarded if it isn't graded as PASS.

0.12 Wed Sep 24 09:40:03 BST 2008

• Change to Dist::YACSmoke to add a message whether CPANPLUS is preferring Makefile.PL or Build.PL

0.10 Mon Sep 22 07:22:51 BST 2008

• Test for M::B during Makefile.PL install updated version and make sure that CPANPLUS::Dist::Build is installed as well ( RT #39477 ).
• Check if M::B is installed. set prefer_makefile to 0 if it is.

0.08 Mon Sep 15 08:07:46 BST 2008

• set CPANPLUS conf prefer_makefile to 0 if perl version greater than 5.9.5, which means we have both Module::Build and CPANPLUS::Dist::Build.

0.06 Tue Sep 9 13:55:05 BST 2008

• CP::D::YS - added check for the version of CPANPLUS we are running under. Skip manglement if greater than equal to 0.85_04 where the things we are mangling are fixed.

0.04 Wed Sep 3 17:16:18 BST 2008

• Added filtering for the edge case where CPANPLUS generates a Makefile.PL if there is only a Build.PL. If the grade isn't a pass we bin the test report.

0.02 Sun Jul 20 22:34:07 BST 2008

• first stable release

0.01_03

• Actually explicitly listed YAML::Tiny and Test::Reporter as dependencies.
• Switch some more CPANPLUS configuration settings on by default.

0.01_02 Thu Jul 17 21:20:50 BST 2008

• Fixed the munging of the test report for NA reports.

0.01_01 Thu Jul 17 00:49:33 BST 2008

• Initial CPAN development release