NAME
IO::AIO - Asynchronous Input/Output
SYNOPSIS
use IO::AIO;
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "/etc/passwd: $!";
...
};
aio_unlink "/tmp/file", sub { };
aio_read $fh, 30000, 1024, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
};
# version 2+ has request and group objects
use IO::AIO 2;
aioreq_pri 4; # give next request a very high priority
my $req = aio_unlink "/tmp/file", sub { };
$req->cancel; # cancel request if still in queue
my $grp = aio_group sub { print "all stats done\n" };
add $grp aio_stat "..." for ...;
DESCRIPTION
This module implements asynchronous I/O using whatever means your operating system supports. It is implemented as an interface to "libeio" (<http://software.schmorp.de/pkg/libeio.html>).
Asynchronous means that operations that can normally block your program (e.g. reading from disk) will be done asynchronously: the operation will still block, but you can do something else in the meantime. This is extremely useful for programs that need to stay interactive even when doing heavy I/O (GUI programs, high performance network servers etc.), but can also be used to easily do operations in parallel that are normally done sequentially, e.g. stat'ing many files, which is much faster on a RAID volume or over NFS when you do a number of stat operations concurrently.
While most of this works on all types of file descriptors (for example sockets), using these functions on file descriptors that support nonblocking operation (again, sockets, pipes etc.) is very inefficient. Use an event loop for that (such as the EV module): IO::AIO will naturally fit into such an event loop itself.
In this version, a number of threads are started that execute your requests and signal their completion. You don't need thread support in perl, and the threads created by this module will not be visible to perl. In the future, this module might make use of the native aio functions available on many operating systems. However, they are often not well-supported or restricted (GNU/Linux doesn't allow them on normal files currently, for example), and they would only support aio_read and aio_write, so the remaining functionality would have to be implemented using threads anyway.
Although the module will work in the presence of other (Perl-) threads, it is currently not reentrant in any way, so use appropriate locking yourself, always call "poll_cb" from within the same thread, or never call "poll_cb" (or other "aio_" functions) recursively.
EXAMPLE
This is a simple example that uses the EV module and loads /etc/passwd
use Fcntl;
use EV;
use IO::AIO;
# register the IO::AIO callback with EV
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# queue the request to open /etc/passwd
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
my $fh = shift
or die "error while opening: $!";
# stat'ing filehandles is generally non-blocking
my $size = -s $fh;
# queue a request to read the file
my $contents;
aio_read $fh, 0, $size, $contents, 0, sub {
$_[0] == $size
or die "short read: $!";
close $fh;
# file contents now in $contents
print $contents;
# exit event loop and program
EV::unloop;
};
};
# possibly queue up other requests, or open GUI windows,
# check for sockets etc. etc.
# process events as long as there are some:
EV::loop;
REQUEST ANATOMY AND LIFETIME
Every "aio_*" function creates a request. which is a C data structure not directly visible to Perl.
If called in non-void context, every request function returns a Perl object representing the request. In void context, nothing is returned, which saves a bit of memory.
The perl object is a fairly standard ref-to-hash object. The hash contents are not used by IO::AIO so you are free to store anything you like in it.
During their existance, aio requests travel through the following states, in order:
ready
Immediately after a request is created it is put into the ready
state, waiting for a thread to execute it.
execute
A thread has accepted the request for processing and is currently
executing it (e.g. blocking in read).
pending
The request has been executed and is waiting for result processing.
While request submission and execution is fully asynchronous, result
processing is not and relies on the perl interpreter calling
"poll_cb" (or another function with the same effect).
result
The request results are processed synchronously by "poll_cb".
The "poll_cb" function will process all outstanding aio requests by
calling their callbacks, freeing memory associated with them and
managing any groups they are contained in.
done
Request has reached the end of its lifetime and holds no resources
anymore (except possibly for the Perl object, but its connection to
the actual aio request is severed and calling its methods will
either do nothing or result in a runtime error).
FUNCTIONS
QUICK OVERVIEW
This section simply lists the prototypes of the most important functions
for quick reference. See the following sections for function-by-function
documentation.
aio_open $pathname, $flags, $mode, $callback->($fh)
aio_close $fh, $callback->($status)
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
aio_readahead $fh,$offset,$length, $callback->($retval)
aio_stat $fh_or_path, $callback->($status)
aio_lstat $fh, $callback->($status)
aio_statvfs $fh_or_path, $callback->($statvfs)
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
aio_truncate $fh_or_path, $offset, $callback->($status)
aio_chmod $fh_or_path, $mode, $callback->($status)
aio_unlink $pathname, $callback->($status)
aio_mknod $path, $mode, $dev, $callback->($status)
aio_link $srcpath, $dstpath, $callback->($status)
aio_symlink $srcpath, $dstpath, $callback->($status)
aio_readlink $path, $callback->($link)
aio_rename $srcpath, $dstpath, $callback->($status)
aio_mkdir $pathname, $mode, $callback->($status)
aio_rmdir $pathname, $callback->($status)
aio_readdir $pathname, $callback->($entries)
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
IO::AIO::READDIR_DENTS IO::AIO::READDIR_DIRS_FIRST
IO::AIO::READDIR_STAT_ORDER IO::AIO::READDIR_FOUND_UNKNOWN
aio_load $path, $data, $callback->($status)
aio_copy $srcpath, $dstpath, $callback->($status)
aio_move $srcpath, $dstpath, $callback->($status)
aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
aio_rmtree $path, $callback->($status)
aio_sync $callback->($status)
aio_fsync $fh, $callback->($status)
aio_fdatasync $fh, $callback->($status)
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
aio_pathsync $path, $callback->($status)
aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
aio_mlockall $flags, $callback->($status)
aio_group $callback->(...)
aio_nop $callback->()
$prev_pri = aioreq_pri [$pri]
aioreq_nice $pri_adjust
IO::AIO::poll_wait
IO::AIO::poll_cb
IO::AIO::poll
IO::AIO::flush
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
IO::AIO::min_parallel $nthreads
IO::AIO::max_parallel $nthreads
IO::AIO::max_idle $nthreads
IO::AIO::idle_timeout $seconds
IO::AIO::max_outstanding $maxreqs
IO::AIO::nreqs
IO::AIO::nready
IO::AIO::npending
IO::AIO::sendfile $ofh, $ifh, $offset, $count
IO::AIO::fadvise $fh, $offset, $len, $advice
IO::AIO::madvise $scalar, $offset, $length, $advice
IO::AIO::mprotect $scalar, $offset, $length, $protect
IO::AIO::munlock $scalar, $offset = 0, $length = undef
IO::AIO::munlockall
AIO REQUEST FUNCTIONS
All the "aio_*" calls are more or less thin wrappers around the syscall
with the same name (sans "aio_"). The arguments are similar or
identical, and they all accept an additional (and optional) $callback
argument which must be a code reference. This code reference will get
called with the syscall return code (e.g. most syscalls return -1 on
error, unlike perl, which usually delivers "false") as its sole argument
after the given syscall has been executed asynchronously.
All functions expecting a filehandle keep a copy of the filehandle internally until the request has finished.
All functions return request objects of type IO::AIO::REQ that allow further manipulation of those requests while they are in-flight.
The pathnames you pass to these routines must be absolute and encoded as octets. The reason for the former is that at the time the request is being executed, the current working directory could have changed. Alternatively, you can make sure that you never change the current working directory anywhere in the program and then use relative paths.
To encode pathnames as octets, either make sure you either: a) always pass in filenames you got from outside (command line, readdir etc.) without tinkering, b) are ASCII or ISO 8859-1, c) use the Encode module and encode your pathnames to the locale (or other) encoding in effect in the user environment, d) use Glib::filename_from_unicode on unicode filenames or e) use something else to ensure your scalar has the correct contents.
This works, btw. independent of the internal UTF-8 bit, which IO::AIO handles correctly whether it is set or not.
$prev_pri = aioreq_pri [$pri]
Returns the priority value that would be used for the next request
and, if $pri is given, sets the priority for the next aio request.
The default priority is 0, the minimum and maximum priorities are -4
and 4, respectively. Requests with higher priority will be serviced
first.
The priority will be reset to 0 after each call to one of the
"aio_*" functions.
Example: open a file with low priority, then read something from it
with higher priority so the read request is serviced before other
low priority open requests (potentially spamming the cache):
aioreq_pri -3;
aio_open ..., sub {
return unless $_[0];
aioreq_pri -2;
aio_read $_[0], ..., sub {
...
};
};
aioreq_nice $pri_adjust
Similar to "aioreq_pri", but subtracts the given value from the
current priority, so the effect is cumulative.
aio_open $pathname, $flags, $mode, $callback->($fh)
Asynchronously open or create a file and call the callback with a
newly created filehandle for the file.
The pathname passed to "aio_open" must be absolute. See API NOTES,
above, for an explanation.
The $flags argument is a bitmask. See the "Fcntl" module for a list.
They are the same as used by "sysopen".
Likewise, $mode specifies the mode of the newly created file, if it
didn't exist and "O_CREAT" has been given, just like perl's
"sysopen", except that it is mandatory (i.e. use 0 if you don't
create new files, and 0666 or 0777 if you do). Note that the $mode
will be modified by the umask in effect then the request is being
executed, so better never change the umask.
Example:
aio_open "/etc/passwd", IO::AIO::O_RDONLY, 0, sub {
if ($_[0]) {
print "open successful, fh is $_[0]\n";
...
} else {
die "open failed: $!\n";
}
};
In addition to all the common open modes/flags ("O_RDONLY",
"O_WRONLY", "O_RDWR", "O_CREAT", "O_TRUNC", "O_EXCL" and
"O_APPEND"), the following POSIX and non-POSIX constants are
available (missing ones on your system are, as usual, 0):
"O_ASYNC", "O_DIRECT", "O_NOATIME", "O_CLOEXEC", "O_NOCTTY",
"O_NOFOLLOW", "O_NONBLOCK", "O_EXEC", "O_SEARCH", "O_DIRECTORY",
"O_DSYNC", "O_RSYNC", "O_SYNC" and "O_TTY_INIT".
aio_close $fh, $callback->($status)
Asynchronously close a file and call the callback with the result
code.
Unfortunately, you can't do this to perl. Perl insists very
strongly on closing the file descriptor associated with the
filehandle itself.
Therefore, "aio_close" will not close the filehandle - instead it
will use dup2 to overwrite the file descriptor with the write-end of
a pipe (the pipe fd will be created on demand and will be cached).
Or in other words: the file descriptor will be closed, but it will
not be free for reuse until the perl filehandle is closed.
aio_read $fh,$offset,$length, $data,$dataoffset, $callback->($retval) aio_write $fh,$offset,$length, $data,$dataoffset, $callback->($retval)
Reads or writes $length bytes from or to the specified $fh and
$offset into the scalar given by $data and offset $dataoffset and
calls the callback without the actual number of bytes read (or -1 on
error, just like the syscall).
"aio_read" will, like "sysread", shrink or grow the $data scalar to
offset plus the actual number of bytes read.
If $offset is undefined, then the current file descriptor offset
will be used (and updated), otherwise the file descriptor offset
will not be changed by these calls.
If $length is undefined in "aio_write", use the remaining length of
$data.
If $dataoffset is less than zero, it will be counted from the end of
$data.
The $data scalar MUST NOT be modified in any way while the request
is outstanding. Modifying it can result in segfaults or World War
III (if the necessary/optional hardware is installed).
Example: Read 15 bytes at offset 7 into scalar $buffer, starting at
offset 0 within the scalar:
aio_read $fh, 7, 15, $buffer, 0, sub {
$_[0] > 0 or die "read error: $!";
print "read $_[0] bytes: <$buffer>\n";
};
aio_sendfile $out_fh, $in_fh, $in_offset, $length, $callback->($retval)
Tries to copy $length bytes from $in_fh to $out_fh. It starts
reading at byte offset $in_offset, and starts writing at the current
file offset of $out_fh. Because of that, it is not safe to issue
more than one "aio_sendfile" per $out_fh, as they will interfere
with each other. The same $in_fh works fine though, as this function
does not move or use the file offset of $in_fh.
Please note that "aio_sendfile" can read more bytes from $in_fh than
are written, and there is no way to find out how many more bytes
have been read from "aio_sendfile" alone, as "aio_sendfile" only
provides the number of bytes written to $out_fh. Only if the result
value equals $length one can assume that $length bytes have been
read.
Unlike with other "aio_" functions, it makes a lot of sense to use
"aio_sendfile" on non-blocking sockets, as long as one end
(typically the $in_fh) is a file - the file I/O will then be
asynchronous, while the socket I/O will be non-blocking. Note,
however, that you can run into a trap where "aio_sendfile" reads
some data with readahead, then fails to write all data, and when the
socket is ready the next time, the data in the cache is already
lost, forcing "aio_sendfile" to again hit the disk. Explicit
"aio_read" + "aio_write" let's you better control resource usage.
This call tries to make use of a native "sendfile"-like syscall to
provide zero-copy operation. For this to work, $out_fh should refer
to a socket, and $in_fh should refer to an mmap'able file.
If a native sendfile cannot be found or it fails with "ENOSYS",
"EINVAL", "ENOTSUP", "EOPNOTSUPP", "EAFNOSUPPORT", "EPROTOTYPE" or
"ENOTSOCK", it will be emulated, so you can call "aio_sendfile" on
any type of filehandle regardless of the limitations of the
operating system.
As native sendfile syscalls (as practically any non-POSIX interface
hacked together in a hurry to improve benchmark numbers) tend to be
rather buggy on many systems, this implementation tries to work
around some known bugs in Linux and FreeBSD kernels (probably
others, too), but that might fail, so you really really should check
the return value of "aio_sendfile" - fewre bytes than expected might
have been transferred.
aio_readahead $fh,$offset,$length, $callback->($retval)
"aio_readahead" populates the page cache with data from a file so
that subsequent reads from that file will not block on disk I/O. The
$offset argument specifies the starting point from which data is to
be read and $length specifies the number of bytes to be read. I/O is
performed in whole pages, so that offset is effectively rounded down
to a page boundary and bytes are read up to the next page boundary
greater than or equal to (off-set+length). "aio_readahead" does not
read beyond the end of the file. The current file offset of the file
is left unchanged.
If that syscall doesn't exist (likely if your OS isn't Linux) it
will be emulated by simply reading the data, which would have a
similar effect.
aio_stat $fh_or_path, $callback->($status) aio_lstat $fh, $callback->($status)
Works like perl's "stat" or "lstat" in void context. The callback
will be called after the stat and the results will be available
using "stat _" or "-s _" etc...
The pathname passed to "aio_stat" must be absolute. See API NOTES,
above, for an explanation.
Currently, the stats are always 64-bit-stats, i.e. instead of
returning an error when stat'ing a large file, the results will be
silently truncated unless perl itself is compiled with large file
support.
To help interpret the mode and dev/rdev stat values, IO::AIO offers
the following constants and functions (if not implemented, the
constants will be 0 and the functions will either "croak" or fall
back on traditional behaviour).
"S_IFMT", "S_IFIFO", "S_IFCHR", "S_IFBLK", "S_IFLNK", "S_IFREG",
"S_IFDIR", "S_IFWHT", "S_IFSOCK", "IO::AIO::major $dev_t",
"IO::AIO::minor $dev_t", "IO::AIO::makedev $major, $minor".
Example: Print the length of /etc/passwd:
aio_stat "/etc/passwd", sub {
$_[0] and die "stat failed: $!";
print "size is ", -s _, "\n";
};
aio_statvfs $fh_or_path, $callback->($statvfs)
Works like the POSIX "statvfs" or "fstatvfs" syscalls, depending on
whether a file handle or path was passed.
On success, the callback is passed a hash reference with the
following members: "bsize", "frsize", "blocks", "bfree", "bavail",
"files", "ffree", "favail", "fsid", "flag" and "namemax". On
failure, "undef" is passed.
The following POSIX IO::AIO::ST_* constants are defined: "ST_RDONLY"
and "ST_NOSUID".
The following non-POSIX IO::AIO::ST_* flag masks are defined to
their correct value when available, or to 0 on systems that do not
support them: "ST_NODEV", "ST_NOEXEC", "ST_SYNCHRONOUS",
"ST_MANDLOCK", "ST_WRITE", "ST_APPEND", "ST_IMMUTABLE",
"ST_NOATIME", "ST_NODIRATIME" and "ST_RELATIME".
Example: stat "/wd" and dump out the data if successful.
aio_statvfs "/wd", sub {
my $f = $_[0]
or die "statvfs: $!";
use Data::Dumper;
say Dumper $f;
};
# result:
{
bsize => 1024,
bfree => 4333064312,
blocks => 10253828096,
files => 2050765568,
flag => 4096,
favail => 2042092649,
bavail => 4333064312,
ffree => 2042092649,
namemax => 255,
frsize => 1024,
fsid => 1810
}
aio_utime $fh_or_path, $atime, $mtime, $callback->($status)
Works like perl's "utime" function (including the special case of
$atime and $mtime being undef). Fractional times are supported if
the underlying syscalls support them.
When called with a pathname, uses utimes(2) if available, otherwise
utime(2). If called on a file descriptor, uses futimes(2) if
available, otherwise returns ENOSYS, so this is not portable.
Examples:
# set atime and mtime to current time (basically touch(1)):
aio_utime "path", undef, undef;
# set atime to current time and mtime to beginning of the epoch:
aio_utime "path", time, undef; # undef==0
aio_chown $fh_or_path, $uid, $gid, $callback->($status)
Works like perl's "chown" function, except that "undef" for either
$uid or $gid is being interpreted as "do not change" (but -1 can
also be used).
Examples:
# same as "chown root path" in the shell:
aio_chown "path", 0, -1;
# same as above:
aio_chown "path", 0, undef;
aio_truncate $fh_or_path, $offset, $callback->($status)
Works like truncate(2) or ftruncate(2).
aio_chmod $fh_or_path, $mode, $callback->($status)
Works like perl's "chmod" function.
aio_unlink $pathname, $callback->($status)
Asynchronously unlink (delete) a file and call the callback with the
result code.
aio_mknod $path, $mode, $dev, $callback->($status)
[EXPERIMENTAL]
Asynchronously create a device node (or fifo). See mknod(2).
The only (POSIX-) portable way of calling this function is:
aio_mknod $path, IO::AIO::S_IFIFO | $mode, 0, sub { ...
See "aio_stat" for info about some potentially helpful extra
constants and functions.
aio_link $srcpath, $dstpath, $callback->($status)
Asynchronously create a new link to the existing object at $srcpath
at the path $dstpath and call the callback with the result code.
aio_symlink $srcpath, $dstpath, $callback->($status)
Asynchronously create a new symbolic link to the existing object at
$srcpath at the path $dstpath and call the callback with the result
code.
aio_readlink $path, $callback->($link)
Asynchronously read the symlink specified by $path and pass it to
the callback. If an error occurs, nothing or undef gets passed to
the callback.
aio_rename $srcpath, $dstpath, $callback->($status)
Asynchronously rename the object at $srcpath to $dstpath, just as
rename(2) and call the callback with the result code.
aio_mkdir $pathname, $mode, $callback->($status)
Asynchronously mkdir (create) a directory and call the callback with
the result code. $mode will be modified by the umask at the time the
request is executed, so do not change your umask.
aio_rmdir $pathname, $callback->($status)
Asynchronously rmdir (delete) a directory and call the callback with
the result code.
aio_readdir $pathname, $callback->($entries)
Unlike the POSIX call of the same name, "aio_readdir" reads an
entire directory (i.e. opendir + readdir + closedir). The entries
will not be sorted, and will NOT include the "." and ".." entries.
The callback is passed a single argument which is either "undef" or
an array-ref with the filenames.
aio_readdirx $pathname, $flags, $callback->($entries, $flags)
Quite similar to "aio_readdir", but the $flags argument allows to
tune behaviour and output format. In case of an error, $entries will
be "undef".
The flags are a combination of the following constants, ORed
together (the flags will also be passed to the callback, possibly
modified):
IO::AIO::READDIR_DENTS
When this flag is off, then the callback gets an arrayref
consisting of names only (as with "aio_readdir"), otherwise it
gets an arrayref with "[$name, $type, $inode]" arrayrefs, each
describing a single directory entry in more detail.
$name is the name of the entry.
$type is one of the "IO::AIO::DT_xxx" constants:
"IO::AIO::DT_UNKNOWN", "IO::AIO::DT_FIFO", "IO::AIO::DT_CHR",
"IO::AIO::DT_DIR", "IO::AIO::DT_BLK", "IO::AIO::DT_REG",
"IO::AIO::DT_LNK", "IO::AIO::DT_SOCK", "IO::AIO::DT_WHT".
"IO::AIO::DT_UNKNOWN" means just that: readdir does not know. If
you need to know, you have to run stat yourself. Also, for speed
reasons, the $type scalars are read-only: you can not modify
them.
$inode is the inode number (which might not be exact on systems
with 64 bit inode numbers and 32 bit perls). This field has
unspecified content on systems that do not deliver the inode
information.
IO::AIO::READDIR_DIRS_FIRST
When this flag is set, then the names will be returned in an
order where likely directories come first, in optimal stat
order. This is useful when you need to quickly find directories,
or you want to find all directories while avoiding to stat()
each entry.
If the system returns type information in readdir, then this is
used to find directories directly. Otherwise, likely directories
are names beginning with ".", or otherwise names with no dots,
of which names with short names are tried first.
IO::AIO::READDIR_STAT_ORDER
When this flag is set, then the names will be returned in an
order suitable for stat()'ing each one. That is, when you plan
to stat() all files in the given directory, then the returned
order will likely be fastest.
If both this flag and "IO::AIO::READDIR_DIRS_FIRST" are
specified, then the likely dirs come first, resulting in a less
optimal stat order.
IO::AIO::READDIR_FOUND_UNKNOWN
This flag should not be set when calling "aio_readdirx".
Instead, it is being set by "aio_readdirx", when any of the
$type's found were "IO::AIO::DT_UNKNOWN". The absense of this
flag therefore indicates that all $type's are known, which can
be used to speed up some algorithms.
aio_load $path, $data, $callback->($status)
This is a composite request that tries to fully load the given file
into memory. Status is the same as with aio_read.
aio_copy $srcpath, $dstpath, $callback->($status)
Try to copy the file (directories not supported as either source
or destination) from $srcpath to $dstpath and call the callback with
a status of 0 (ok) or -1 (error, see $!).
This is a composite request that creates the destination file with
mode 0200 and copies the contents of the source file into it using
"aio_sendfile", followed by restoring atime, mtime, access mode and
uid/gid, in that order.
If an error occurs, the partial destination file will be unlinked,
if possible, except when setting atime, mtime, access mode and
uid/gid, where errors are being ignored.
aio_move $srcpath, $dstpath, $callback->($status)
Try to move the file (directories not supported as either source
or destination) from $srcpath to $dstpath and call the callback with
a status of 0 (ok) or -1 (error, see $!).
This is a composite request that tries to rename(2) the file first;
if rename fails with "EXDEV", it copies the file with "aio_copy"
and, if that is successful, unlinks the $srcpath.
aio_scandir $path, $maxreq, $callback->($dirs, $nondirs)
Scans a directory (similar to "aio_readdir") but additionally tries
to efficiently separate the entries of directory $path into two sets
of names, directories you can recurse into (directories), and ones
you cannot recurse into (everything else, including symlinks to
directories).
"aio_scandir" is a composite request that creates of many sub
requests_ $maxreq specifies the maximum number of outstanding aio
requests that this function generates. If it is "<= 0", then a
suitable default will be chosen (currently 4).
On error, the callback is called without arguments, otherwise it
receives two array-refs with path-relative entry names.
Example:
aio_scandir $dir, 0, sub {
my ($dirs, $nondirs) = @_;
print "real directories: @$dirs\n";
print "everything else: @$nondirs\n";
};
Implementation notes.
The "aio_readdir" cannot be avoided, but "stat()"'ing every entry
can.
If readdir returns file type information, then this is used directly
to find directories.
Otherwise, after reading the directory, the modification time, size
etc. of the directory before and after the readdir is checked, and
if they match (and isn't the current time), the link count will be
used to decide how many entries are directories (if >= 2).
Otherwise, no knowledge of the number of subdirectories will be
assumed.
Then entries will be sorted into likely directories a non-initial
dot currently) and likely non-directories (see "aio_readdirx"). Then
every entry plus an appended "/." will be "stat"'ed, likely
directories first, in order of their inode numbers. If that
succeeds, it assumes that the entry is a directory or a symlink to
directory (which will be checked seperately). This is often faster
than stat'ing the entry itself because filesystems might detect the
type of the entry without reading the inode data (e.g. ext2fs
filetype feature), even on systems that cannot return the filetype
information on readdir.
If the known number of directories (link count - 2) has been
reached, the rest of the entries is assumed to be non-directories.
This only works with certainty on POSIX (= UNIX) filesystems, which
fortunately are the vast majority of filesystems around.
It will also likely work on non-POSIX filesystems with reduced
efficiency as those tend to return 0 or 1 as link counts, which
disables the directory counting heuristic.
aio_rmtree $path, $callback->($status)
Delete a directory tree starting (and including) $path, return the
status of the final "rmdir" only. This is a composite request that
uses "aio_scandir" to recurse into and rmdir directories, and unlink
everything else.
aio_sync $callback->($status)
Asynchronously call sync and call the callback when finished.
aio_fsync $fh, $callback->($status)
Asynchronously call fsync on the given filehandle and call the
callback with the fsync result code.
aio_fdatasync $fh, $callback->($status)
Asynchronously call fdatasync on the given filehandle and call the
callback with the fdatasync result code.
If this call isn't available because your OS lacks it or it couldn't
be detected, it will be emulated by calling "fsync" instead.
aio_sync_file_range $fh, $offset, $nbytes, $flags, $callback->($status)
Sync the data portion of the file specified by $offset and $length
to disk (but NOT the metadata), by calling the Linux-specific
sync_file_range call. If sync_file_range is not available or it
returns ENOSYS, then fdatasync or fsync is being substituted.
$flags can be a combination of
"IO::AIO::SYNC_FILE_RANGE_WAIT_BEFORE",
"IO::AIO::SYNC_FILE_RANGE_WRITE" and
"IO::AIO::SYNC_FILE_RANGE_WAIT_AFTER": refer to the sync_file_range
manpage for details.
aio_pathsync $path, $callback->($status)
This request tries to open, fsync and close the given path. This is
a composite request intended to sync directories after directory
operations (E.g. rename). This might not work on all operating
systems or have any specific effect, but usually it makes sure that
directory changes get written to disc. It works for anything that
can be opened for read-only, not just directories.
Future versions of this function might fall back to other methods
when "fsync" on the directory fails (such as calling "sync").
Passes 0 when everything went ok, and -1 on error.
aio_msync $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
This is a rather advanced IO::AIO call, which only works on
mmap(2)ed scalars (see the "IO::AIO::mmap" function, although it
also works on data scalars managed by the Sys::Mmap or Mmap modules,
note that the scalar must only be modified in-place while an aio
operation is pending on it).
It calls the "msync" function of your OS, if available, with the
memory area starting at $offset in the string and ending $length
bytes later. If $length is negative, counts from the end, and if
$length is "undef", then it goes till the end of the string. The
flags can be a combination of "IO::AIO::MS_ASYNC",
"IO::AIO::MS_INVALIDATE" and "IO::AIO::MS_SYNC".
aio_mtouch $scalar, $offset = 0, $length = undef, flags = 0, $callback->($status)
This is a rather advanced IO::AIO call, which works best on
mmap(2)ed scalars.
It touches (reads or writes) all memory pages in the specified range
inside the scalar. All caveats and parameters are the same as for
"aio_msync", above, except for flags, which must be either 0 (which
reads all pages and ensures they are instantiated) or
"IO::AIO::MT_MODIFY", which modifies the memory page s(by reading
and writing an octet from it, which dirties the page).
aio_mlock $scalar, $offset = 0, $length = undef, $callback->($status)
This is a rather advanced IO::AIO call, which works best on
mmap(2)ed scalars.
It reads in all the pages of the underlying storage into memory (if
any) and locks them, so they are not getting swapped/paged out or
removed.
If $length is undefined, then the scalar will be locked till the
end.
On systems that do not implement "mlock", this function returns -1
and sets errno to "ENOSYS".
Note that the corresponding "munlock" is synchronous and is
documented under "MISCELLANEOUS FUNCTIONS".
Example: open a file, mmap and mlock it - both will be undone when
$data gets destroyed.
open my $fh, "<", $path or die "$path: $!";
my $data;
IO::AIO::mmap $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh;
aio_mlock $data; # mlock in background
aio_mlockall $flags, $callback->($status)
Calls the "mlockall" function with the given $flags (a combination
of "IO::AIO::MCL_CURRENT" and "IO::AIO::MCL_FUTURE").
On systems that do not implement "mlockall", this function returns
-1 and sets errno to "ENOSYS".
Note that the corresponding "munlockall" is synchronous and is
documented under "MISCELLANEOUS FUNCTIONS".
Example: asynchronously lock all current and future pages into
memory.
aio_mlockall IO::AIO::MCL_FUTURE;
aio_group $callback->(...)
This is a very special aio request: Instead of doing something, it
is a container for other aio requests, which is useful if you want
to bundle many requests into a single, composite, request with a
definite callback and the ability to cancel the whole request with
its subrequests.
Returns an object of class IO::AIO::GRP. See its documentation below
for more info.
Example:
my $grp = aio_group sub {
print "all stats done\n";
};
add $grp
(aio_stat ...),
(aio_stat ...),
...;
aio_nop $callback->()
This is a special request - it does nothing in itself and is only
used for side effects, such as when you want to add a dummy request
to a group so that finishing the requests in the group depends on
executing the given code.
While this request does nothing, it still goes through the execution
phase and still requires a worker thread. Thus, the callback will
not be executed immediately but only after other requests in the
queue have entered their execution phase. This can be used to
measure request latency.
IO::AIO::aio_busy $fractional_seconds, $callback->() NOT EXPORTED
Mainly used for debugging and benchmarking, this aio request puts
one of the request workers to sleep for the given time.
While it is theoretically handy to have simple I/O scheduling
requests like sleep and file handle readable/writable, the overhead
this creates is immense (it blocks a thread for a long time) so do
not use this function except to put your application under
artificial I/O pressure.
IO::AIO::REQ CLASS
All non-aggregate "aio_*" functions return an object of this class when
called in non-void context.
cancel $req
Cancels the request, if possible. Has the effect of skipping
execution when entering the execute state and skipping calling the
callback when entering the the result state, but will leave the
request otherwise untouched (with the exception of readdir). That
means that requests that currently execute will not be stopped and
resources held by the request will not be freed prematurely.
cb $req $callback->(...)
Replace (or simply set) the callback registered to the request.
IO::AIO::GRP CLASS
This class is a subclass of IO::AIO::REQ, so all its methods apply to
objects of this class, too.
A IO::AIO::GRP object is a special request that can contain multiple other aio requests.
You create one by calling the "aio_group" constructing function with a callback that will be called when all contained requests have entered the "done" state:
my $grp = aio_group sub {
print "all requests are done\n";
};
You add requests by calling the "add" method with one or more "IO::AIO::REQ" objects:
$grp->add (aio_unlink "...");
add $grp aio_stat "...", sub {
$_[0] or return $grp->result ("error");
# add another request dynamically, if first succeeded
add $grp aio_open "...", sub {
$grp->result ("ok");
};
};
This makes it very easy to create composite requests (see the source of "aio_move" for an application) that work and feel like simple requests.
Their lifetime, simplified, looks like this: when they are empty, they will finish very quickly. If they contain only requests that are in the "done" state, they will also finish. Otherwise they will continue to exist.
That means after creating a group you have some time to add requests (precisely before the callback has been invoked, which is only done within the "poll_cb"). And in the callbacks of those requests, you can add further requests to the group. And only when all those requests have finished will the the group itself finish.
add $grp ...
$grp->add (...)
Add one or more requests to the group. Any type of IO::AIO::REQ can
be added, including other groups, as long as you do not create
circular dependencies.
Returns all its arguments.
$grp->cancel_subs
Cancel all subrequests and clears any feeder, but not the group
request itself. Useful when you queued a lot of events but got a
result early.
The group request will finish normally (you cannot add requests to
the group).
$grp->result (...)
Set the result value(s) that will be passed to the group callback
when all subrequests have finished and set the groups errno to the
current value of errno (just like calling "errno" without an error
number). By default, no argument will be passed and errno is zero.
$grp->errno ([$errno])
Sets the group errno value to $errno, or the current value of errno
when the argument is missing.
Every aio request has an associated errno value that is restored
when the callback is invoked. This method lets you change this value
from its default (0).
Calling "result" will also set errno, so make sure you either set $!
before the call to "result", or call c<errno> after it.
feed $grp $callback->($grp)
Sets a feeder/generator on this group: every group can have an
attached generator that generates requests if idle. The idea behind
this is that, although you could just queue as many requests as you
want in a group, this might starve other requests for a potentially
long time. For example, "aio_scandir" might generate hundreds of
thousands "aio_stat" requests, delaying any later requests for a
long time.
To avoid this, and allow incremental generation of requests, you can
instead a group and set a feeder on it that generates those
requests. The feed callback will be called whenever there are few
enough (see "limit", below) requests active in the group itself and
is expected to queue more requests.
The feed callback can queue as many requests as it likes (i.e. "add"
does not impose any limits).
If the feed does not queue more requests when called, it will be
automatically removed from the group.
If the feed limit is 0 when this method is called, it will be set to
2 automatically.
Example:
# stat all files in @files, but only ever use four aio requests concurrently:
my $grp = aio_group sub { print "finished\n" };
limit $grp 4;
feed $grp sub {
my $file = pop @files
or return;
add $grp aio_stat $file, sub { ... };
};
limit $grp $num
Sets the feeder limit for the group: The feeder will be called
whenever the group contains less than this many requests.
Setting the limit to 0 will pause the feeding process.
The default value for the limit is 0, but note that setting a feeder
automatically bumps it up to 2.
SUPPORT FUNCTIONS
EVENT PROCESSING AND EVENT LOOP INTEGRATION
$fileno = IO::AIO::poll_fileno
Return the request result pipe file descriptor. This filehandle
must be polled for reading by some mechanism outside this module
(e.g. EV, Glib, select and so on, see below or the SYNOPSIS). If the
pipe becomes readable you have to call "poll_cb" to check the
results.
See "poll_cb" for an example.
IO::AIO::poll_cb
Process some outstanding events on the result pipe. You have to call
this regularly. Returns 0 if all events could be processed (or there
were no events to process), or -1 if it returned earlier for
whatever reason. Returns immediately when no events are outstanding.
The amount of events processed depends on the settings of
"IO::AIO::max_poll_req" and "IO::AIO::max_poll_time".
If not all requests were processed for whatever reason, the
filehandle will still be ready when "poll_cb" returns, so normally
you don't have to do anything special to have it called later.
Apart from calling "IO::AIO::poll_cb" when the event filehandle
becomes ready, it can be beneficial to call this function from loops
which submit a lot of requests, to make sure the results get
processed when they become available and not just when the loop is
finished and the event loop takes over again. This function returns
very fast when there are no outstanding requests.
Example: Install an Event watcher that automatically calls
IO::AIO::poll_cb with high priority (more examples can be found in
the SYNOPSIS section, at the top of this document):
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', async => 1,
cb => \&IO::AIO::poll_cb);
IO::AIO::poll_wait
If there are any outstanding requests and none of them in the result
phase, wait till the result filehandle becomes ready for reading
(simply does a "select" on the filehandle. This is useful if you
want to synchronously wait for some requests to finish).
See "nreqs" for an example.
IO::AIO::poll
Waits until some requests have been handled.
Returns the number of requests processed, but is otherwise strictly
equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
IO::AIO::flush
Wait till all outstanding AIO requests have been handled.
Strictly equivalent to:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
IO::AIO::max_poll_reqs $nreqs
IO::AIO::max_poll_time $seconds
These set the maximum number of requests (default 0, meaning
infinity) that are being processed by "IO::AIO::poll_cb" in one
call, respectively the maximum amount of time (default 0, meaning
infinity) spent in "IO::AIO::poll_cb" to process requests (more
correctly the mininum amount of time "poll_cb" is allowed to use).
Setting "max_poll_time" to a non-zero value creates an overhead of
one syscall per request processed, which is not normally a problem
unless your callbacks are really really fast or your OS is really
really slow (I am not mentioning Solaris here). Using
"max_poll_reqs" incurs no overhead.
Setting these is useful if you want to ensure some level of
interactiveness when perl is not fast enough to process all requests
in time.
For interactive programs, values such as 0.01 to 0.1 should be fine.
Example: Install an Event watcher that automatically calls
IO::AIO::poll_cb with low priority, to ensure that other parts of
the program get the CPU sometimes even under high AIO load.
# try not to spend much more than 0.1s in poll_cb
IO::AIO::max_poll_time 0.1;
# use a low priority so other tasks have priority
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r', nice => 1,
cb => &IO::AIO::poll_cb);
CONTROLLING THE NUMBER OF THREADS
IO::AIO::min_parallel $nthreads
Set the minimum number of AIO threads to $nthreads. The current
default is 8, which means eight asynchronous operations can execute
concurrently at any one time (the number of outstanding requests,
however, is unlimited).
IO::AIO starts threads only on demand, when an AIO request is queued
and no free thread exists. Please note that queueing up a hundred
requests can create demand for a hundred threads, even if it turns
out that everything is in the cache and could have been processed
faster by a single thread.
It is recommended to keep the number of threads relatively low, as
some Linux kernel versions will scale negatively with the number of
threads (higher parallelity => MUCH higher latency). With current
Linux 2.6 versions, 4-32 threads should be fine.
Under most circumstances you don't need to call this function, as
the module selects a default that is suitable for low to moderate
load.
IO::AIO::max_parallel $nthreads
Sets the maximum number of AIO threads to $nthreads. If more than
the specified number of threads are currently running, this function
kills them. This function blocks until the limit is reached.
While $nthreads are zero, aio requests get queued but not executed
until the number of threads has been increased again.
This module automatically runs "max_parallel 0" at program end, to
ensure that all threads are killed and that there are no outstanding
requests.
Under normal circumstances you don't need to call this function.
IO::AIO::max_idle $nthreads
Limit the number of threads (default: 4) that are allowed to idle
(i.e., threads that did not get a request to process within the idle
timeout (default: 10 seconds). That means if a thread becomes idle
while $nthreads other threads are also idle, it will free its
resources and exit.
This is useful when you allow a large number of threads (e.g. 100 or
1000) to allow for extremely high load situations, but want to free
resources under normal circumstances (1000 threads can easily
consume 30MB of RAM).
The default is probably ok in most situations, especially if thread
creation is fast. If thread creation is very slow on your system you
might want to use larger values.
IO::AIO::idle_timeout $seconds
Sets the minimum idle timeout (default 10) after which worker
threads are allowed to exit. SEe "IO::AIO::max_idle".
IO::AIO::max_outstanding $maxreqs
Sets the maximum number of outstanding requests to $nreqs. If you do
queue up more than this number of requests, the next call to
"IO::AIO::poll_cb" (and other functions calling "poll_cb", such as
"IO::AIO::flush" or "IO::AIO::poll") will block until the limit is
no longer exceeded.
In other words, this setting does not enforce a queue limit, but can
be used to make poll functions block if the limit is exceeded.
This is a very bad function to use in interactive programs because
it blocks, and a bad way to reduce concurrency because it is
inexact: Better use an "aio_group" together with a feed callback.
It's main use is in scripts without an event loop - when you want to
stat a lot of files, you can write somehting like this:
IO::AIO::max_outstanding 32;
for my $path (...) {
aio_stat $path , ...;
IO::AIO::poll_cb;
}
IO::AIO::flush;
The call to "poll_cb" inside the loop will normally return
instantly, but as soon as more thna 32 reqeusts are in-flight, it
will block until some requests have been handled. This keeps the
loop from pushing a large number of "aio_stat" requests onto the
queue.
The default value for "max_outstanding" is very large, so there is
no practical limit on the number of outstanding requests.
STATISTICAL INFORMATION
IO::AIO::nreqs
Returns the number of requests currently in the ready, execute or
pending states (i.e. for which their callback has not been invoked
yet).
Example: wait till there are no outstanding requests anymore:
IO::AIO::poll_wait, IO::AIO::poll_cb
while IO::AIO::nreqs;
IO::AIO::nready
Returns the number of requests currently in the ready state (not yet
executed).
IO::AIO::npending
Returns the number of requests currently in the pending state
(executed, but not yet processed by poll_cb).
MISCELLANEOUS FUNCTIONS
IO::AIO implements some functions that might be useful, but are not
asynchronous.
IO::AIO::sendfile $ofh, $ifh, $offset, $count
Calls the "eio_sendfile_sync" function, which is like
"aio_sendfile", but is blocking (this makes most sense if you know
the input data is likely cached already and the output filehandle is
set to non-blocking operations).
Returns the number of bytes copied, or -1 on error.
IO::AIO::fadvise $fh, $offset, $len, $advice
Simply calls the "posix_fadvise" function (see its manpage for
details). The following advice constants are avaiable:
"IO::AIO::FADV_NORMAL", "IO::AIO::FADV_SEQUENTIAL",
"IO::AIO::FADV_RANDOM", "IO::AIO::FADV_NOREUSE",
"IO::AIO::FADV_WILLNEED", "IO::AIO::FADV_DONTNEED".
On systems that do not implement "posix_fadvise", this function
returns ENOSYS, otherwise the return value of "posix_fadvise".
IO::AIO::madvise $scalar, $offset, $len, $advice
Simply calls the "posix_madvise" function (see its manpage for
details). The following advice constants are avaiable:
"IO::AIO::MADV_NORMAL", "IO::AIO::MADV_SEQUENTIAL",
"IO::AIO::MADV_RANDOM", "IO::AIO::MADV_WILLNEED",
"IO::AIO::MADV_DONTNEED".
On systems that do not implement "posix_madvise", this function
returns ENOSYS, otherwise the return value of "posix_madvise".
IO::AIO::mprotect $scalar, $offset, $len, $protect
Simply calls the "mprotect" function on the preferably AIO::mmap'ed
$scalar (see its manpage for details). The following protect
constants are avaiable: "IO::AIO::PROT_NONE", "IO::AIO::PROT_READ",
"IO::AIO::PROT_WRITE", "IO::AIO::PROT_EXEC".
On systems that do not implement "mprotect", this function returns
ENOSYS, otherwise the return value of "mprotect".
IO::AIO::mmap $scalar, $length, $prot, $flags, $fh[, $offset]
Memory-maps a file (or anonymous memory range) and attaches it to
the given $scalar, which will act like a string scalar.
The only operations allowed on the scalar are "substr"/"vec" that
don't change the string length, and most read-only operations such
as copying it or searching it with regexes and so on.
Anything else is unsafe and will, at best, result in memory leaks.
The memory map associated with the $scalar is automatically removed
when the $scalar is destroyed, or when the "IO::AIO::mmap" or
"IO::AIO::munmap" functions are called.
This calls the "mmap"(2) function internally. See your system's
manual page for details on the $length, $prot and $flags parameters.
The $length must be larger than zero and smaller than the actual
filesize.
$prot is a combination of "IO::AIO::PROT_NONE",
"IO::AIO::PROT_EXEC", "IO::AIO::PROT_READ" and/or
"IO::AIO::PROT_WRITE",
$flags can be a combination of "IO::AIO::MAP_SHARED" or
"IO::AIO::MAP_PRIVATE", or a number of system-specific flags (when
not available, the are defined as 0): "IO::AIO::MAP_ANONYMOUS"
(which is set to "MAP_ANON" if your system only provides this
constant), "IO::AIO::MAP_HUGETLB", "IO::AIO::MAP_LOCKED",
"IO::AIO::MAP_NORESERVE", "IO::AIO::MAP_POPULATE" or
"IO::AIO::MAP_NONBLOCK"
If $fh is "undef", then a file descriptor of -1 is passed.
$offset is the offset from the start of the file - it generally must
be a multiple of "IO::AIO::PAGESIZE" and defaults to 0.
Example:
use Digest::MD5;
use IO::AIO;
open my $fh, "<verybigfile"
or die "$!";
IO::AIO::mmap my $data, -s $fh, IO::AIO::PROT_READ, IO::AIO::MAP_SHARED, $fh
or die "verybigfile: $!";
my $fast_md5 = md5 $data;
IO::AIO::munmap $scalar
Removes a previous mmap and undefines the $scalar.
IO::AIO::munlock $scalar, $offset = 0, $length = undef
Calls the "munlock" function, undoing the effects of a previous
"aio_mlock" call (see its description for details).
IO::AIO::munlockall
Calls the "munlockall" function.
On systems that do not implement "munlockall", this function returns
ENOSYS, otherwise the return value of "munlockall".
EVENT LOOP INTEGRATION
It is recommended to use AnyEvent::AIO to integrate IO::AIO automatically into many event loops:
# AnyEvent integration (EV, Event, Glib, Tk, POE, urxvt, pureperl...)
use AnyEvent::AIO;
You can also integrate IO::AIO manually into many event loops, here are some examples of how to do this:
# EV integration
my $aio_w = EV::io IO::AIO::poll_fileno, EV::READ, \&IO::AIO::poll_cb;
# Event integration
Event->io (fd => IO::AIO::poll_fileno,
poll => 'r',
cb => \&IO::AIO::poll_cb);
# Glib/Gtk2 integration
add_watch Glib::IO IO::AIO::poll_fileno,
in => sub { IO::AIO::poll_cb; 1 };
# Tk integration
Tk::Event::IO->fileevent (IO::AIO::poll_fileno, "",
readable => \&IO::AIO::poll_cb);
# Danga::Socket integration
Danga::Socket->AddOtherFds (IO::AIO::poll_fileno =>
\&IO::AIO::poll_cb);
FORK BEHAVIOUR
Usage of pthreads in a program changes the semantics of fork
considerably. Specifically, only async-safe functions can be called
after fork. Perl doesn't know about this, so in general, you cannot call
fork with defined behaviour in perl. IO::AIO uses pthreads, so this
applies, but many other extensions and (for inexplicable reasons) perl
itself often is linked against pthreads, so this limitation applies.
Some operating systems have extensions that allow safe use of fork, and this module should do "the right thing" on those, and tries on others. At the time of this writing (2011) only GNU/Linux supports these extensions to POSIX.
MEMORY USAGE
Per-request usage:
Each aio request uses - depending on your architecture - around 100-200 bytes of memory. In addition, stat requests need a stat buffer (possibly a few hundred bytes), readdir requires a result buffer and so on. Perl scalars and other data passed into aio requests will also be locked and will consume memory till the request has entered the done state.
This is not awfully much, so queuing lots of requests is not usually a problem.
Per-thread usage:
In the execution phase, some aio requests require more memory for temporary buffers, and each thread requires a stack and other data structures (usually around 16k-128k, depending on the OS).
KNOWN BUGS
Known bugs will be fixed in the next release.
SEE ALSO
AnyEvent::AIO for easy integration into event loops, Coro::AIO for a more natural syntax.
AUTHOR
Marc Lehmann <schmorp@schmorp.de>
http://home.schmorp.de/