| Net-Telnet-Trango documentation | Contained in the Net-Telnet-Trango distribution. |
Net::Telnet::Trango - Perl extension for accessing the Trango telnet interface
use Net::Telnet::Trango;
my $t = new Net::Telnet::Trango ( Timeout => 5 );
$t->open( Host => $ap ) or die "Error connecting: $!";
$t->login('password') or die "Couldn't log in: $!";
# Do whatever
$t->exit;
$t->close;
Perl access to the telnet interface on Trango APs and SUs.
A handy feature is that it will parse the output from certain commands that is in the format "[key1] value1 [key2] value2" and put those in a hashref that is returned. This makes using the output from things like sysinfo very easy to do.
None
new([Options from Net::Telnet,]
[Decode => 0,]);
Same as new from Net::Telnet but sets the default Trango Prompt: '/[\$#]>\s*\Z/'
It also takes an optional parameter 'Decode'. If not defined it defaults to 1, if it is set to 0, it will not decode the output and instead return a reference to an array of the lines that were returned from the command.
These are usually only set internally.
Returns the firmware version if available, otherwise undef.
It should be available after a successful open().
returns the type of host from the login banner for example M5830S or M5300S.
Should be available after a successful open().
returns 1 when connected, undef otherwise.
returns 1 after a successful login(), 0 if it failed and undef if login() was never called.
returns, as an array ref, the output from the last cmd() that was run.
returns the last error reported. Probably contains the last entry in last_lines.
Does the same as exit()
Does the same as reboot()
Does the same as save_ss()
Most of these are just shortcuts to cmd(String => METHOD),
as such they accept the same options as cmd().
Specifically they take a named paramater "args", for example:
tftpd(args => 'on') would enable tftpd
Returns a hash ref of the decoded output from the command.
Also see enable_tftpd() and disable_tftpd() as those check that it was successfully changed.
Returns a hash ref of the decoded output from the command.
Returns a hash ref of the decoded output from the command.
exits the command session with the Trango and closes the connection
reboots the Trango and closes the connection
resets settings to default
Takes an optional argument, which sets the remarks. If there is no argument, returns the current remarks.
my $old_remarks = $t->remarks(); $t->remarks($new_remarks);
Returns an array ref of hashes containing each log line.
Returns true on success, undef on failure
Returns a hashref of the output from the syslog command
Returns the output from the pipe command
Returns the output from the maclist command
No useful output.
Returns the output from the eth link command
This command seems to cause some weird issues. It often will cause the command after it to appear to fail. I am not sure why.
Returns information about the SU.
You need to pass in the $suid and it will return the info for that suid.
$t->su_info($suid);
$t->su_testrflink($suid|'all');
Returns 1 on success, undef on failure.
$t->set_baseid($baseid);
$t->set_suid($baseid);
$t->set_defaultopmode(ap|su);
$t->opmode([ap y|su y]);
$channel = '11 v';
$t->freq([$channel]);
$channels = '11 v 11 h 12 v 12 h';
$t->freq_writescan($channels);
$channels = $t->freq_scantable();
# now $channels eq '11 v 11 h 12 v 12 h';
Calls Net::Telnet::open() then makes sure you get a password prompt so you are ready to login() and parses the login banner so you can get host_type() and firmware_version()
Calls open() if not already connected, then sends the password and sets logged_in() if successful
linktest('suid'[, 'pkt len, bytes'[, '# of pkts'[, '# of cycles']]]);
Returns a hash reference to the results of the test
su_password('new_password'[, 'suid']) If no suid is specified, the default is "all".
$t->su_password('good_pass', 5);
ipconfig( 'new_ip', 'new_subnet', 'new_gateway' )
$t->ipconfig( '10.0.1.5', '255.255.255.0', '10.0.1.1' );
su_ipconfig( 'suid', 'new_ip', 'new_subnet', 'new_gateway' )
$t->su_ipconfig( 5, '10.0.1.5', '255.255.255.0', '10.0.1.1' );
returns a reference to an array of hashes each containing these keys 'suid', 'su2su', 'type', 'cir', 'mir' and 'mac'
Takes the following paramaters
suid : numeric,
type : (reg|pr)
cir : numeric,
mir : numeric,
mac : Almost any format, it will be reformatted,
and returns true on success or undef otherwise.
$t->sudb_add($suid, 'reg', $cir, $mir, $mac);
You should save_sudb() after calling this, or your changes will be lost when the AP is rebooted.
Takes either 'all' or the suid of the su to delete and returns true on success or undef otherwise.
$t->sudb_delete($suid);
You should save_sudb() after calling this, or your changes will be lost when the AP is rebooted.
Takes either the suid of the su to change as well as what you are changing, either "cir, mir or su2su" and returns true on success or undef otherwise.
cir and mir also take a value to set the cir/mir to.
su2su takes a group id parameter that is in hex.
$t->sudb_modify($suid, 'cir', 512);
You should save_sudb() after calling this, or your changes will be lost when the AP is rebooted.
runs tftpd(args => 'on') and makes sure that Tftpd is now 'listen'ing
runs tftpd(args => 'off') and makes sure that Tftpd is now 'disabled'
This does most of the work. At the heart, it calls Net::Telnet::cmd() but it also does some special stuff for Trango.
Normally returns the last lines from from the command
If you are using this, rather than one of the "easy" methods above, you probably want to read through the source of this module to see how some of the other commands are called.
In addition to the Net::Telnet::cmd() options, it also accepts these:
decode - if this is true, then it will send the output lines to _decode_lines() and then returns the decoded output
no_prompt - if this is true, it does not wait for a prompt, so you are not stuck waiting for something that will never happen.
cmd_disconnects - if this is true, it then sets logged_in() to false, then it will close() the connection and set is_connected() to false
expect - if this is set (usually to 'Success.') it will check for that in the last line of output and if it does not, will return undef because the command probably failed
args - a string containing the command line options that are passed to the command
$t->cmd( String => 'exit', no_prompt => 1, cmd_disconnects => 1 );
Trango Documentation - http://www.trangobroadband.com/support/product_docs.htm
There are still a lot of commands that are not accessed directly. If you call them (as cmd("command + args") or whatever) and it works, please send me examples that work and I will try to get it incorporated into the next version of the script.
I also want to be able to parse the different types of output from commands like su, sudb all and anything else that would be better available as a perl datastructure.
Andrew Fresh <andrew@rraz.net>
You can find documentation for this module with the perldoc command.
perldoc Net::Telnet::Trango
You can also look for information at:
Copyright (C) 2005,2006,2007 by Andrew Fresh
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
| Net-Telnet-Trango documentation | Contained in the Net-Telnet-Trango distribution. |
package Net::Telnet::Trango; # $RedRiver: Trango.pm,v 1.60 2009/07/31 21:46:07 andrew Exp $ use strict; use warnings; use base 'Net::Telnet';
our $VERSION = '0.05'; my $EMPTY = q{}; my $SPACE = q{ };
sub new { my $class = shift; my %args = (); if ( @_ == 1 ) { $args{'Host'} = shift; } else { %args = @_; } $args{'Prompt'} ||= '/[\$#]>\s*\r?\n?$/'; my $decode = $args{'Decode'}; delete $args{'Decode'}; my $self = $class->SUPER::new(%args); bless $self if ref $self; $args{Decode} = defined $decode ? $decode : 1; $args{is_connected} = 0; $args{logged_in} = 0; *$self->{net_telnet_trango} = \%args; return $self; } # _password <new password> <new password> # ? [command] # apsearch <secs> <ch#> <h|v> [<ch#> <h|v>]... # arp -bcast <on|off> # bcastscant <all|suid> <ch#> <h|v> [<ch#> <h|v> ... # bye # cf2cf ap [default|<size>] # date # date <month> <day> <year> # freq scantable # freq channeltable # freq writescan [<ch#> <h|v>] # freq writechannel [<ch#> <freq>] ... # freq <ch #> <h|v> # help [command] # heater [<on temp> <off temp>] # ipconfig [<new ip> <new subnet mask> <new gateway>] # linktest <suid> [<pkt len, bytes> [<# of pkts> [<# of cycle>]]] # log [<# of entries, 1..179>] # log <sum> <# of entries, 1..179> # logout # opmode [ap [y]] # password # ping <ip addr> # polar <h|v> # power <setism|setunii> <max|min|<dBm>> # reboot # restart # remarks [<str>] # rfrxthreshold [<ism|unii> <-90|-85|-80|-75|-70|-65>] # rfrxth [<ism|unii> <-90|-85|-80|-75|-70|-65>] # sysinfo # set suid <id> # set apid <id> # set baseid <id> # set defaultopmode [<ap|su> <min,0..10>] # set defaultopmode off # set snmpcomm [<read | write | trap (id or setall)> <str>] # set mir [on|off] # set mir threshold <kbps> # set rssitarget [<ism|unii> <dBm>] # set serviceradius [<ism | unii> <miles>] # ssrssi <ch #> <h|v> # su [<suid>|all] # su changechannel <all|suid> <ch#> <h|v> # su ipconfig <suid> <new ip> <new subnet> <new gateway> # su [live|poweroff|priority] # su <ping|info|status> <suid> # su powerleveling <all|suid> # su reboot <all|suid> # su restart <all|suid> # su testrflink <all|suid> [r] # su testrflink <setlen> [64..1600] # su testrflink <aptx> [20..100] # su sw <suid|all> <sw #> <on|off> # sudb [dload | view] # sudb add <suid> pr <cir,kbps> <mir,kbps> <device id,hex> # sudb add <suid> reg <cir,kbps> <mir,kbps> <device id,hex> # sudb delete <all|<suid>> # sudb modify <suid> <cir|mir> <kbps> # sudb modify <suid> <su2su> <group id,hex> # sudb view # sulog [lastmins | sampleperiod <1..60>] # sulog [<# of entry,1..18>] # survey <ism|unii> <time, sec> <h|v> # sw [<sw #> <on|off>] # temp # tftpd [on|off] # time # time <hour> <min> <sec> # save <mainimage|fpgaimage> <current chksum> <new chksum> # save <systemsetting|sudb> # updateflash <mainimage|fpgaimage> <current chksum> <new chksum> # updateflash <systemsetting|sudb>
my $success = 'Success\\.'; my %COMMANDS = ( _clear => { String => "\n" }, tftpd => { decode => 'all', expect => $success }, ver => { decode => 'all' }, sysinfo => { decode => 'all', expect => $success }, updateflash => { decode => 'all', expect => $success }, sulog => { decode => 'sulog', expect => $success }, 'exit' => { no_prompt => 1, cmd_disconnects => 1 }, reboot => { no_prompt => 1, cmd_disconnects => 1 }, 'reset' => {}, remarks => { decode => 'all', expect => $success }, save_sudb => { String => 'save sudb', expect => $success }, syslog => { expect => $success }, 'pipe' => {}, # XXX needs a special decode maclist => { decode => 'maclist' }, maclist_reset => { String => 'maclist reset', expect => 'done' }, eth_link => { String => 'eth link', expect => $success }, su_info => { String => 'su info', decode => 'all', expect => $success }, su_testrflink => { String => 'su testrflink', decode => 'each', expect => $success }, save_ss => { String => 'save ss', expect => $success }, set_baseid => { String => 'set baseid', decode => 'all', expect => $success }, set_suid => { String => 'set suid', decode => 'all', expect => $success }, set_defaultopmode => { String => 'set defaultopmode', decode => 'all', expect => $success }, opmode => { decode => 'all', expect => $success }, freq => { decode => 'freq', expect => $success }, freq_writescan => { String => 'freq writescan', decode => 'all', expect => $success }, freq_scantable => { String => 'freq scantable', decode => 'all', expect => $success }, arq => { decode => 'all' }, ); my %ALIASES = ( bye => 'exit', restart => 'reboot', Host => 'host', save_systemseting => 'save_ss', ); my %ACCESS = map { $_ => 1 } qw( firmware_version host_type is_connected logged_in login_banner Timeout last_lines last_vals last_error Decode ); sub AUTOLOAD { my $self = shift; my ($method) = ( our $AUTOLOAD ) =~ /^.*::(\w+)$/ or die "Weird: $AUTOLOAD"; if ( exists $ALIASES{$method} ) { $method = $ALIASES{$method}; return $self->$method(@_); } if ( exists $COMMANDS{$method} ) { my %cmd; foreach my $k ( keys %{ $COMMANDS{$method} } ) { $cmd{$k} = $COMMANDS{$method}{$k}; } $cmd{'String'} ||= $method; $cmd{'args'} .= $SPACE . shift if ( @_ == 1 ); return $self->cmd( %cmd, @_ ); } if ( exists $ACCESS{$method} ) { my $s = *$self->{net_telnet_trango}; my $prev = $s->{$method}; ( $s->{$method} ) = @_ if @_; return $prev; } $method = "SUPER::$method"; return $self->$method(@_); }
sub open { my $self = shift; unless ( $self->SUPER::open(@_) ) { $self->last_error( "Couldn't connect to " . $self->host . ": $!" ); return; } ## Get to login prompt unless ( $self->waitfor( -match => '/password: ?$/i', -errmode => "return", ) ) { $self->last_error( "problem connecting to host (" . $self->host . "): " . $self->lastline ); return; } $self->parse_login_banner( $self->lastline ); $self->is_connected(1); return $self->is_connected; }
sub login { my $self = shift; unless ( $self->is_connected ) { $self->open or return; } my $password = shift; $self->print($password); unless ( $self->waitfor( -match => $self->prompt, -errmode => "return", ) ) { $self->last_error( "login ($self->host) failed: " . $self->lastline ); return; } $self->logged_in(1); return $self->logged_in; }
sub parse_login_banner { my $self = shift; if (@_) { $self->login_banner(@_); } my $banner = $self->login_banner; my ( $type, $sep1, $subtype, $sep2, $ver ) = $banner =~ /Welcome to Trango Broadband Wireless,? (\S+)([\s-]+)(\S+)([\s-]+)(.+)$/i; $type .= $sep1 . $subtype; $ver = $subtype . $sep2 . $ver; $self->login_banner($banner); $self->host_type($type); $self->firmware_version($ver); return 1; }
sub linktest { my $self = shift; my $suid = shift; # These numbers are what I found as defaults when running the command my $pkt_len = shift || 1600; my $pkt_cnt = shift || 500; my $cycles = shift || 10; my %config = @_; # * 2, one for the FromAP, one FromSU. Then / 1000 to get to ms. # XXX This might need to be changed, this makes the default timeout the # same as $pkt_len, and that might not be enough at slower speeds. $config{Timeout} ||= int( ( $pkt_len * $pkt_cnt * $cycles * 2 ) / 1000 ); my $string = join $SPACE, 'linktest', $suid, $pkt_len, $pkt_cnt, $cycles; return $self->cmd( %config, String => $string, decode => 'linktest', ); }
sub su_password { my $self = shift; my $new_pass = shift || $EMPTY; my $su = shift || 'all'; unless ( defined $new_pass ) { $self->last_error("No new password"); #return; } return $self->cmd( String => 'su password ' . $su . $SPACE . $new_pass . $SPACE . $new_pass, expect => $success, ); }
sub ipconfig { my $self = shift; my $string = join $SPACE, 'ipconfig', @_; if ( @_ == 3 ) { $self->print($string); my @lines = $self->waitfor( Match => '/save\s+and\s+activate/', ); $self->print('y'); $self->logged_in(0); $self->is_connected(0); foreach my $line (@lines) { if ( $line =~ s/New \s configuration:\s+//xms ) { return _decode_lines($line); } } return {}; } # ipconfig [ <new ip> <new subnet> <new gateway> ] return $self->cmd( String => $string, expect => $success ); }
sub su_ipconfig { my $self = shift; my $suid = shift; my $new_ip = shift; my $new_subnet = shift; my $new_gateway = shift; if ( $suid =~ /\D/ ) { $self->last_error("Invalid suid '$suid'"); return; } unless ($new_ip) { $self->last_error("no new_ip passed"); return; } unless ($new_subnet) { $self->last_error("no new_subnet passed"); return; } unless ($new_gateway) { $self->last_error("no new_gateway passed"); return; } # su ipconfig <suid> <new ip> <new subnet> <new gateway> return $self->cmd( String => 'su ipconfig ' . $suid . $SPACE . $new_ip . $SPACE . $new_subnet . $SPACE . $new_gateway, expect => $success, ); }
sub sudb_view { my $self = shift; my $lines = $self->cmd( String => 'sudb view', expect => $success ) || []; return unless @{$lines}; my $s = *$self->{net_telnet_trango}; return $lines if !$s->{'Decode'}; my @sus; foreach ( @{$lines} ) { next unless $_; if (/^ \[(\d+)\] \s+ [[:xdigit:]]{2} ([[:xdigit:]]) ([[:xdigit:]]) \s+ (\d+) \s+ (\d+) \s+ ([[:xdigit:]\s]+) $/ixms ) { my %s = ( suid => $1, su2su => $2 ? $2 : undef, type => $3 == 1 ? 'reg' : $3 == 5 ? 'pri' : $3, cir => $4, mir => $5, mac => $6, ); $s{'mac'} =~ s/\s//gxms; $s{'mac'} = uc( $s{'mac'} ); push @sus, \%s; } } return \@sus; }
sub sudb_add { my $self = shift; my $suid = shift; my $type = shift; my $cir = shift; my $mir = shift; my $mac = shift; if ( $suid =~ /\D/ ) { $self->last_error("Invalid suid '$suid'"); return; } unless ( lc($type) eq 'reg' || lc($type) eq 'pr' ) { $self->last_error("Invalid type '$type'"); return; } if ( $cir =~ /\D/ ) { $self->last_error("Invalid CIR '$cir'"); return; } if ( $mir =~ /\D/ ) { $self->last_error("Invalid MIR '$mir'"); return; } my $new_mac = $mac; $new_mac =~ s/[^0-9A-Fa-f]//g; unless ( length $new_mac == 12 ) { $self->last_error("Invalid MAC '$mac'"); return; } $new_mac = join $SPACE, $new_mac =~ /../g; my $string = 'sudb add ' . $suid . $SPACE . $type . $SPACE . $cir . $SPACE . $mir . $SPACE . $new_mac; return $self->cmd( String => $string, expect => $success ); }
sub sudb_delete { my $self = shift; my $suid = shift; #if (lc($suid) ne 'all' || $suid =~ /\D/) { if ( $suid =~ /\D/ ) { $self->last_error("Invalid suid '$suid'"); return; } return $self->cmd( String => 'sudb delete ' . $suid, expect => $success ); }
sub sudb_modify { my $self = shift; my $suid = shift; my $opt = shift; my $value = shift; if ( $suid =~ /\D/ ) { $self->last_error("Invalid suid '$suid'"); return; } if ( lc($opt) eq 'cir' or lc($opt) eq 'mir' ) { if ( $value =~ /\D/ ) { $self->last_error("Invalid $opt '$value'"); return; } } elsif ( lc($opt) eq 'su2su' ) { if ( $value =~ /[^0-9A-Za-f]/ ) { $self->last_error("Invalid MAC '$value'"); return; } } else { $self->last_error("Invalid option '$opt'"); return; } my $string = 'sudb modify ' . $suid . $SPACE . $opt . $SPACE . $value; return $self->cmd( String => $string, expect => $success ); }
sub enable_tftpd { my $self = shift; my $vals = $self->tftpd( args => 'on' ); if ( ref $vals eq 'HASH' && $vals->{'Tftpd'} eq 'listen' ) { return $vals; } else { return; } }
sub disable_tftpd { my $self = shift; my $vals = $self->tftpd( args => 'off' ); if ( ref $vals eq 'HASH' && $vals->{'Tftpd'} eq 'disabled' ) { return $vals; } else { return; } }
sub cmd { my $self = shift; my $s = *$self->{net_telnet_trango}; my @valid_net_telnet_opts = qw( String Output Cmd_remove_mode Errmode Input_record_separator Ors Output_record_separator Prompt Rs Timeout ); my %cfg; if ( @_ == 1 ) { $cfg{'String'} = shift; } elsif ( @_ > 1 ) { %cfg = @_; } $cfg{'Timeout'} ||= $self->Timeout; unless ( $cfg{'String'} ) { $self->last_error("No command passed"); return; } unless ( $self->is_connected ) { $self->last_error("Not connected"); return; } unless ( $self->logged_in ) { $self->last_error("Not logged in"); return; } my %cmd; foreach (@valid_net_telnet_opts) { if ( exists $cfg{$_} ) { $cmd{$_} = $cfg{$_}; } } if ( $cfg{'args'} ) { $cmd{'String'} .= $SPACE . $cfg{'args'}; } #print "Running cmd $cmd{String}\n"; my @lines; if ( $cfg{'no_prompt'} ) { $self->print( $cmd{'String'} ); @lines = $self->lastline; } else { @lines = $self->SUPER::cmd(%cmd); } $self->last_lines( \@lines ); my $last = $self->lastline; my $prompt = $self->prompt; $prompt =~ s{^/}{}xms; $prompt =~ s{/[gixms]*$}{}xms; while ( @lines && $last =~ qr($prompt) ) { pop @lines; $last = $lines[-1]; } $self->last_error($EMPTY); my $vals = 1; if ( $s->{'Decode'} && $cfg{'decode'} ) { if ( $cfg{'decode'} eq 'each' ) { $vals = _decode_each_line(@lines); } elsif ( $cfg{'decode'} eq 'sulog' ) { $vals = _decode_sulog(@lines); } elsif ( $cfg{'decode'} eq 'maclist' ) { $vals = _decode_maclist(@lines); if ( !$vals ) { $self->last_error("Error decoding maclist"); } } elsif ( $cfg{'decode'} eq 'linktest' ) { $vals = _decode_linktest(@lines); if ( !$vals ) { $self->last_error("Error decoding linktest"); } } elsif ( $cfg{'decode'} eq 'freq' ) { $vals = _decode_freq(@lines); } else { $vals = _decode_lines(@lines); } } if ( ref $vals eq 'HASH' ) { $vals->{_raw} = join q{}, @lines; } $self->last_vals($vals); if ( ( not $cfg{'expect'} ) || $last =~ /$cfg{'expect'}$/ ) { if ( $cfg{'cmd_disconnects'} ) { $self->logged_in(0); $self->close; $self->is_connected(0); } if ( $s->{'Decode'} && $cfg{'decode'} ) { return $vals; } else { return \@lines; } } else { my $err; if ( grep {/\[ERR\]/} @lines ) { $err = _decode_lines(@lines); } if ( ref $err eq 'HASH' && $err->{ERR} ) { $self->last_error( $err->{ERR} ); } else { $self->last_error("Error with command ($cmd{'String'}): $last"); } return; } } #=item _decode_lines sub _decode_lines { my @lines = @_; my %conf; my $key = $EMPTY; my $val = undef; my @vals; my $in_key = 0; my $in_val = 1; LINE: while ( my $line = shift @lines ) { next LINE if $line =~ /$success\Z/; next LINE if $line =~ /^ \*+ \s+ \d+ \s+ \*+ \Z/xms; # Special decode for sysinfo on a TrangoLink 45 if ( $line =~ /^(.* Channel \s+ Table):\s*(.*)\Z/xms ) { my $key = $1; my $note = $2; my %vals; while ( $line = shift @lines ) { if ( $line =~ /^\Z/ ) { $conf{$key} = \%vals; $conf{$key}{note} = $note; next LINE; } my $decoded = _decode_lines($line); if ($decoded) { %vals = ( %vals, %{$decoded} ); } } } # Another special decode for the TrangoLink elsif ( $line =~ /^ RF \s Band \s \# (\d+) \s+ \( ([^\)]+) \) \s* (.*)$ /xms ) { my $num = $1; my $band = $2; my $extra = $3; if ( $extra =~ /\[/ ) { my $decoded = _decode_lines($extra); $conf{'RF Band'}{$num} = $decoded; } else { $conf{'RF Band'}{$num}{$extra} = 1; } next LINE; } my @chars = split //, $line; my $last_key = $EMPTY; foreach my $c (@chars) { if ( $c eq '[' || $c eq "\r" || $c eq "\n" ) { if ( $c eq '[' ) { $in_key = 1; $in_val = 0; } else { $in_key = 0; $in_val = 1; } if ($key) { $key =~ s/^\s+//; $key =~ s/\s+$//; if ($val) { $val =~ s/^\s+//; $val =~ s/\s+\.*$//; } if ( $key eq 'Checksum' && $last_key ) { # Special case for these bastids. my $new = $last_key; $new =~ s/\s+\S+$//; $key = $new . $SPACE . $key; } $conf{$key} = $val; $last_key = $key; $key = $EMPTY; } elsif ($val) { push @vals, $val; } $val = $EMPTY; } elsif ( $c eq ']' ) { $in_val = 1; $in_key = 0; $c = shift @chars; } elsif ($in_key) { $key .= $c; } elsif ($in_val) { $val .= $c; } } } unless ($key) { push @vals, $val; } foreach my $val (@vals) { if ( defined $val && length $val ) { $val =~ s/^\s+//; $val =~ s/\s+\.*$//; } } if ( @vals == 1 ) { $val = $vals[0]; } elsif (@vals) { $val = \@vals; } else { $val = undef; } if (%conf) { $conf{_pre} = $val if $val; return \%conf; } else { return $val; } } #=item _decode_each_line sub _decode_each_line { my @lines = @_; my @decoded; foreach my $line (@lines) { my $decoded = _decode_lines($line); push @decoded, $decoded if defined $decoded && length $decoded; } return \@decoded; } #=item _decode_linktest sub _decode_linktest { my @lines = @_; my %decoded; foreach my $line (@lines) { if ( $line =~ s/^(\d+) \s+ //xms ) { my $line_id = $1; my ( $tm, $rt ); if ( $line =~ s/\s+ (\d+ \s+ \w+) \s* $//xms ) { $rt = $1; } if ( $line =~ s/\s+ (\d+ \s+ \w+) \s* $//xms ) { $tm = $1; } my $d = _decode_lines( $line . "\n" ); $decoded{tests}[$line_id] = $d; $decoded{tests}[$line_id]{'time'} = $tm; $decoded{tests}[$line_id]{rate} = $rt; } else { my $d = _decode_lines( $line . "\n" ); if ($d) { while ( my ( $k, $v ) = each %{$d} ) { $decoded{$k} = $v; } } } } return \%decoded; } #=item _decode_sulog sub _decode_sulog { my @lines = @_; my @decoded; my $last_tm; foreach my $line (@lines) { my $decoded = _decode_lines($line); if ( defined $decoded ) { if ( $decoded->{'tm'} ) { $last_tm = $decoded->{'tm'}; next; } else { $decoded->{'tm'} = $last_tm; } next unless $last_tm; push @decoded, $decoded if defined $decoded; } } return \@decoded; } #=item _decode_maclist sub _decode_maclist { my @lines = @_; my @decoded; my $total_entries = 0; my $current_tm = 0; foreach my $line (@lines) { $line =~ s/\r?\n$//; my ( $mac, $loc, $tm ) = $line =~ / ([0-9a-fA-F ]{17})\s+ (.*)\s+ tm\s+ (\d+) /x; if ($mac) { $mac =~ s/\s+//g; $loc =~ s/^\s+//; $loc =~ s/\s+$//; my $suid = undef; if ( $loc =~ /suid\s+=\s+(\d+)/ ) { $suid = $1; $loc = undef; } push @decoded, { mac => $mac, loc => $loc, tm => $tm, suid => $suid, }; } elsif ( $line =~ /(\d+)\s+entries/ ) { $total_entries = $1; } elsif ( $line =~ /current tm = (\d+)\s+sec/ ) { $current_tm = $1; } } map { $_->{'cur_tm'} = $current_tm } @decoded; if ( scalar @decoded == $total_entries ) { return \@decoded; } else { return; } } #=item _decode_freq sub _decode_freq { my @lines = @_; my $decoded = _decode_lines(@lines); if ( $decoded && $decoded->{ERR} ) { return $decoded; } LINE: foreach my $line (@lines) { if (my ( $channel, $polarity, $freq ) = $line =~ / Ch \s+ \#(\d+) \s+ (\w+) \s+ \[ (\d+) \s+ MHz\] /ixms ) { $decoded = { channel => $channel, polarity => $polarity, frequency => $freq, }; last LINE; } } return $decoded; } 1; # End of Net::Telnet::Trango __END__