SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device


SNMP-Info documentation Contained in the SNMP-Info distribution.

Index


Code Index:

NAME

Top

SNMP::Info::Layer3::Cisco - SNMP Interface to L3 and L2+L3 IOS Cisco Device that are not covered in other classes.

AUTHOR

Top

Max Baker

SYNOPSIS

Top

 # Let SNMP::Info determine the correct subclass for you. 
 my $cisco = new SNMP::Info(
                        AutoSpecify => 1,
                        Debug       => 1,
                        # These arguments are passed directly to SNMP::Session
                        DestHost    => 'myswitch',
                        Community   => 'public',
                        Version     => 2
                        ) 
    or die "Can't connect to DestHost.\n";

 my $class      = $cisco->class();
 print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

Top

Subclass for Generic Cisco Routers running IOS

Inherited Classes

SNMP::Info::CiscoVTP
SNMP::Info::CDP
SNMP::Info::CiscoStats
SNMP::Info::CiscoImage
SNMP::Info::CiscoRTT
SNMP::Info::CiscoQOS
SNMP::Info::CiscoConfig
SNMP::Info::Power
SNMP::Info::Layer3

Required MIBs

CISCO-EIGRP-MIB
Inherited Classes' MIBs

See "Required MIBs" in SNMP::Info::CiscoVTP for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CDP for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoStats for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoImage for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoRTT for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoQOS for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoConfig for its own MIB requirements.

See "Required MIBs" in SNMP::Info::CiscoPower for its own MIB requirements.

See "Required MIBs" in SNMP::Info::Layer3 for its own MIB requirements.

GLOBALS

Top

These are methods that return scalar value from SNMP

$cisco->vendor()
    Returns 'cisco'

$cisco->eigrp_id()

(cEigrpAsRouterId)

Global Methods imported from SNMP::Info::CiscoVTP

See documentation in "GLOBALS" in SNMP::Info::CiscoVTP for details.

Globals imported from SNMP::Info::CDP

See documentation in "GLOBALS" in SNMP::Info::CDP for details.

Globals imported from SNMP::Info::CiscoStats

See documentation in "GLOBALS" in SNMP::Info::CiscoStats for details.

Globals imported from SNMP::Info::CiscoImage

See documentation in "GLOBALS" in SNMP::Info::CiscoImage for details.

Globals imported from SNMP::Info::CiscoRTT

See documentation in "GLOBALS" in SNMP::Info::CiscoRTT for details.

Globals imported from SNMP::Info::CiscoQOS

See documentation in "GLOBALS" in SNMP::Info::CiscoQOS for details.

Globals imported from SNMP::Info::CiscoConfig

See documentation in "GLOBALS" in SNMP::Info::CiscoConfig for details.

Globals imported from SNMP::Info::CiscoPower

See documentation in "GLOBALS" in SNMP::Info::CiscoPower for details.

Globals imported from SNMP::Info::Layer3

See documentation in "GLOBALS" in SNMP::Info::Layer3 for details.

TABLE METHODS

Top

These are methods that return tables of information in the form of a reference to a hash.

$cisco->eigrp_peers()

Returns EIGRP peer IP addresses

(cEigrpPeerAddr)

$cisco->i_vlan()

Returns a mapping between ifIndex and the PVID or default VLAN.

Table Methods imported from SNMP::Info::CiscoVTP

See documentation in "TABLE METHODS" in SNMP::Info::CiscoVTP for details.

Table Methods imported from SNMP::Info::CDP

See documentation in "TABLE METHODS" in SNMP::Info::CDP for details.

Table Methods imported from SNMP::Info::CiscoStats

See documentation in "TABLE METHODS" in SNMP::Info::CiscoStats for details.

Table Methods imported from SNMP::Info::CiscoImage

See documentation in "TABLE METHODS" in SNMP::Info::CiscoImage for details.

Table Methods imported from SNMP::Info::CiscoRTT

See documentation in "TABLE METHODS" in SNMP::Info::CiscoRTT for details.

Table Methods imported from SNMP::Info::CiscoQOS

See documentation in "TABLE METHODS" in SNMP::Info::CiscoQOS for details.

Table Methods imported from SNMP::Info::CiscoConfig

See documentation in "TABLE METHODS" in SNMP::Info::CiscoConfig for details.

Table Methods imported from SNMP::Info::CiscoPower

See documentation in "TABLE METHODS" in SNMP::Info::CiscoPower for details.

Table Methods imported from SNMP::Info::Layer3

See documentation in "TABLE METHODS" in SNMP::Info::Layer3 for details.


SNMP-Info documentation Contained in the SNMP-Info distribution.

# SNMP::Info::Layer3::Cisco
# $Id$
#
# Copyright (c) 2008 Max Baker
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright notice,
#       this list of conditions and the following disclaimer.
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#     * Neither the name of the University of California, Santa Cruz nor the
#       names of its contributors may be used to endorse or promote products
#       derived from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.

package SNMP::Info::Layer3::Cisco;

use strict;
use Exporter;
use SNMP::Info::CiscoVTP;
use SNMP::Info::CDP;
use SNMP::Info::CiscoStats;
use SNMP::Info::CiscoImage;
use SNMP::Info::CiscoRTT;
use SNMP::Info::CiscoQOS;
use SNMP::Info::CiscoConfig;
use SNMP::Info::CiscoPower;
use SNMP::Info::Layer3;

@SNMP::Info::Layer3::Cisco::ISA = qw/SNMP::Info::CiscoVTP SNMP::Info::CDP
    SNMP::Info::CiscoStats SNMP::Info::CiscoImage
    SNMP::Info::CiscoRTT  SNMP::Info::CiscoQOS
    SNMP::Info::CiscoConfig SNMP::Info::CiscoPower
    SNMP::Info::Layer3
    Exporter/;
@SNMP::Info::Layer3::Cisco::EXPORT_OK = qw//;

use vars qw/$VERSION %GLOBALS %MIBS %FUNCS %MUNGE/;

$VERSION = '2.05';

%MIBS = (
    %SNMP::Info::Layer3::MIBS,
    %SNMP::Info::CiscoPower::MIBS,
    %SNMP::Info::CiscoConfig::MIBS,
    %SNMP::Info::CiscoQOS::MIBS,
    %SNMP::Info::CiscoRTT::MIBS,
    %SNMP::Info::CiscoImage::MIBS,
    %SNMP::Info::CiscoStats::MIBS,
    %SNMP::Info::CDP::MIBS,
    %SNMP::Info::CiscoVTP::MIBS,
    'CISCO-EIGRP-MIB' => 'cEigrpAsRouterId',
);

%GLOBALS = (
    %SNMP::Info::Layer3::GLOBALS,      %SNMP::Info::CiscoPower::GLOBALS,
    %SNMP::Info::CiscoConfig::GLOBALS, %SNMP::Info::CiscoQOS::GLOBALS,
    %SNMP::Info::CiscoRTT::GLOBALS,    %SNMP::Info::CiscoImage::GLOBALS,
    %SNMP::Info::CiscoStats::GLOBALS,  %SNMP::Info::CDP::GLOBALS,
    %SNMP::Info::CiscoVTP::GLOBALS, 'eigrp_id' => 'cEigrpAsRouterId',
);

%FUNCS = (
    %SNMP::Info::Layer3::FUNCS,
    %SNMP::Info::CiscoPower::FUNCS,
    %SNMP::Info::CiscoConfig::FUNCS,
    %SNMP::Info::CiscoQOS::FUNCS,
    %SNMP::Info::CiscoRTT::FUNCS,
    %SNMP::Info::CiscoImage::FUNCS,
    %SNMP::Info::CiscoStats::FUNCS,
    %SNMP::Info::CDP::FUNCS,
    %SNMP::Info::CiscoVTP::FUNCS,

    # EIGRP
    'eigrp_peers' => 'cEigrpPeerAddr',
);

%MUNGE = (
    %SNMP::Info::Layer3::MUNGE,
    %SNMP::Info::CiscoPower::MUNGE,
    %SNMP::Info::CiscoConfig::MUNGE,
    %SNMP::Info::CiscoQOS::MUNGE,
    %SNMP::Info::CiscoRTT::MUNGE,
    %SNMP::Info::CiscoImage::MUNGE,
    %SNMP::Info::CiscoStats::MUNGE,
    %SNMP::Info::CDP::MUNGE,
    %SNMP::Info::CiscoVTP::MUNGE,
    'eigrp_peers' => \&SNMP::Info::munge_ip,
);

sub i_vlan {
    my ($cisco)   = shift;
    my ($partial) = shift;

    my ($i_type)  = $cisco->i_type($partial);
    my ($i_descr) = $cisco->i_description($partial);
    my %i_vlan;

    foreach my $idx ( keys %$i_descr ) {
        if ( $i_type->{$idx} eq 'l2vlan' || $i_type->{$idx} eq 135 ) {
            if ( $i_descr->{$idx} =~ /\.(\d+)$/ ) {
                $i_vlan{$idx} = $1;
            }
        }
    }
    return \%i_vlan;
}

1;
__END__